Metabo 601754750 LiHD Cordless Beveling Kit with 2 5.5ah Batteries

• 1x Metabo KFM 18 LTX 3RF 5.5 LiHD Cordless Beveling Tool
• 2x Metabo 625342000 18V Lithium-Ion 5.5 Ah Cordless Tool Batteries
• 1x Metabo ASC 30-36 V "AIR COOLED" Cordless Battery Charger
• 2x Carbide indexable inserts 45° chamfer
• 1x MetaLoc case
• 2x Carbide indexable inserts radius R2
• 2x Carbide indexable inserts radius R3
• 1x Guide Stop
• 1x Screwdriver Torx 15
• 1x Bow type handle
• 1x Dust Protection Filter

• UPC: 4007430293459

• Power Source: Battery

• Product Type: Beveling Tool

• Battery Included: Yes

• Max. Chamfer Ht. @ 45 (in): 0.156

• Max. Chamfer W @ 45 (in): 0.156

• Variable Speed: Yes

• Voltage: 18 V

• Weight W/ Battery (lbs): 6.8

• Maximum RPM: 7000.0

• Power Source: Electric - Cordless

• Color / Finish: Green/black

• Grinder Switch Type: Sliding Switch

• Battery Size: Battery Packs

• Cordless / Corded: Cordless

• Charger Included: Yes

• Battery Composition: Lithium-Ion (Li-ion)

• Weight W/o Battery (lbs): 4.9

• Grinder Type: Bevel

• Length (in): 14.4

• Lock-on Switch: Yes

• Global Trade Number (GTIN): 04007430293459

• Width (in): 3.1

• Housing Material: Cast aluminum

• Product Storage Included: Case

• No. Of Batteries Included: 2

• Battery Voltage (V): 18

• Battery Ampere-hour (Ah): 5.5

• Manufacturer Warranty: 3 Years

Metabo KFM 18 LTX 3RF 5.5 LiHD Cordless Beveling Tool:

• Overload protection: protects the motor from overheating
• Electronic soft start for smooth start-up
• Restart protection: prevents unintentional start-up after power supply interruption
• Detachable dust filter protects motor from coarse particles
• Ultra-M Technology: highest power, gentle charging, and 3 year warranty on the battery pack

Metabo 625342000 18V Lithium-Ion 5.5 Ah Cordless Tool Batteries:

• LiHD battery packs for ultimate performance and extremely long use with minimum temperature change
• Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
• Patented "AIR COOLED" charging technology
• Permanent electronic Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
• Processor-controlled charge and discharge management
• Capacity display to permanently monitor charge status
• No memory effect

Metabo ASC 30-36 V "AIR COOLED" Cordless Battery Charger:

• Monitored charging with microcontroller
• Battery monitoring
• Charge time approximately 30 minutes at 1.5 Ah
• "AIR COOLED" function
• For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs.
• Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
• Charger switches to compensation charge: to conserve capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then constantly maintained at optimum temperature during the charging process. This principle allows a higher tool life of the battery packs and up to 30% shorter total charging time to be achieved.