JET 708115K Model JWBS-14CS 14" Bandsaw PLUS Closed Stand
UNAVAILABLE
Out of stock or no longer available. Please check out our Band Saws
Condition:
New
Item Number:
JET708115K
Free Shipping
Ships Truck
Free Lift Gate
JET 708115K Model JWBS-14CS 14" Bandsaw PLUS Closed Stand is rated
out of
5 by
3.
The JET 14 inch Closed Stand Bandsaw is a simple but strong bandsaw that is perfect for the home woodworking shop. The 15" x 15" offset cast iron table gives you more work area in front of the blade. Graphite impregnated polymer blade guides with roller bearing thrust guides provide quicker set-up and a cooler running blade. This bandsaw features very little setup when you first get it home but will promise years of solid heavy duty use.
JET 708115K Features:
- Strong cast-iron frame construction to reduce vibration
- Very large tiling table which tilts 45 degrees to the right and 10 degrees to the left
- 1 HP motor which is fan cooled and moves the blade at a brisk 3,000 strokes per minute
- Powder coated finish for incredible durability
- Single knob tracking adjustment which simplifies the blade tracking process
- Six inch depth resaw capacity for cutting large workpieces
- 5 Year Warranty by a trusted company
- 1x JET 708115K Model JWBS-14CS 14" Bandsaw PLUS Closed Stand
- 1x Closed Stand
- 1x Bandsaw Blade
- Table Tilt Left (°): 10
- Tire Cleaning Brush: Yes
- Cord Length (ft): 8
- Band Saw Type: Stationary
- Dust Port: Yes
- Fence Included: No
- Work Light: No
- Micro Adjust Top Guides: Yes
- Dust Port OD (in): 4
- Table Tilt Right (°): 45
- Table Width (in): 15
- Thrust Bearing Contact: Face
- Amperage (A): 10
- Quick Tensioning System: Yes
- Motor Type: Varies
- Table Material: Cast Iron
- Variable Speed: No
- Rack & Pinion Post Adj.: Yes
- Motor Bearings: Yes
- Micro Adjust Top Bottom: Yes
- Saw Wheel Material: Cast Iron
- Throat Depth Capacity (in): 13.5
- Table Length (in): 15
- Minimum Blade Width (in): 0.125
- Max. Blade Width (in): 0.75
- Blade Guide Type: Bearings
- Band Saw Frame Material: Steel
- Voltage: 110 V
- Color / Finish: See Photo
- Dust Blower: No
- Application: Resaw, scrolling, crosscutting, ripping
- Maximum Feet Per Minute: 3000
- Minimum Feet Per Minute: 3000
- Horsepower (hp): 1
- Wheel Diameter (in): 14
- Minimum Blade Length (in): 93.5
- Cut Capacity Height (in): 6
- Blade Width (in): 0.125
- Power Source: Corded Electric
- Cordless / Corded: Corded
- Product Type: Stationary Band Saw
- Manufacturer Warranty: 5 Years (Residential); 2 Years (Commercial)
WARNINGS:
This product may or may not cause Cancer and Reproductive Harm. www.P65Warnings.ca.gov
Rated 5 out of
5
by
Ray from
Parts availability
After almost 14 years of service, it's finally time to replace the wheel protectors, and they are in stock!! I can't believe it.
Date published: 2014-01-29
Rated 4 out of
5
by
Daniel from
Precision machine works hard for you
Much to recommend this machine - nice solid construction, great table, looks nice, fairly quiet, SUPERB dust collection, relatively easy to change blades & make adjustments, tracks well. My only complaint is how hard it is to tension the belt between the motor and the drive wheel. You have to push the motor down to establish tension and then, somehow while keeping it perfectly level, tighten four VERY hard to reach bolts to hold it there. The closed cabinet makes this exceptionally difficult. It took me a couple of hours to get it done to my satisfaction and I'm convinced it's still not as good as it could be. Surely there must be an easier way... but no hints in the manual about how to do this. One the belt was set, the saw performs like a champ.
Date published: 2012-10-02
Rated 5 out of
5
by
Glenn from
Nice Tool
I very happy with this tool so far. it was easy to set up and easy to operate . You may need help lifting the top section on to the base but that's about it. Delivery was great they took it off the truck and even rolled right in the garage.
Date published: 2012-03-25
Oops! You need to select free item(s) from the choice below before continuing.